Glaister Consulting Services
Software and Projects Available From This Site:
CNC - Lathe Spindle Encoder
CNC - Buffered Parallel Port Breakout Board
CNC/Fishing Project - Cast your own down rigger balls
CNC - A bit of EMC2 history(2001) - How to Get and Build RTLinux kernel and EMC
CNC - Measuring Stepper Motor Performance
PIC Microcontroller Projects:
PIC - 16F627/8 programmer and software for Linux.
PIC - 10Mhz GPS Locked Frequency Reference Project
PIC - Emergency Lightbar Controller Project
PIC - RV LED Controller Project
PIC - Make Rotary Pulse Generators from PS/2 Mice.
PIC - A parallel port ICSP or standalone dspic 30fxxxx programmer and software for Linux.
PIC - dspic-servo: 6amp +-25 volt DC brushed servo drive for CNC.
PIC - A Programming Adapter for Using Dspic 30f4011 with the Olimex PG2C
Ham Radio Projects:
Radio - Motorola Radio RIB Programming Cable
Radio - Kenwood Radio Programming Cable
Radio - Uniden Radio RIB Programming Cable
Radio - Cable/Mods to Make a Repeater from 2 Maxtrac Radios
Radio - GE Phoenix SX EEPROM Conversion
Radio - GE Phoenix SX X2212 EEPROM Programmer and Software
Radio - An Icom Rig Control Interface (CT-17 + Audio)
Test Equipment Projects:
Test Equipment - An In Circuit Capacitor ESR Tester
Test Equipment - VNA / Antenna Analyzer
Test Equipment - A RS232 Serial to 3.3v Level Convertor
Home Maintenance - Gutter-Sucker, A 'no climb' gutter cleaning idea
Dual 4' Fluorescent Tube Led Conversion
Welding Project - An off road mini-bike
Welding Project - A Portable Garage/Carport/Boatshed
Note: Rebuilding Glade Projects
Note: rolling back arch linux updates
Custom Hardware, Software or Systems Design Services
The author has close to 40 years of experience in micro/mini computer applications in the
industrial arena. Specialties include 3D object scanning, optimization software, sensor
interfacing, machine control, embedded controllers and network applications. Services include
project definition, prototype design construction and testing, single and 2 sided PCB layout and
generation of project documentation.
Programming languages include assembler, C, C++, gcode and python for products targeted for embedded
controllers, Linux, Unix, DOS, WIN95/98 and Win NT 4.0. Since 2000 the majority of my activity
has been in microcontroller and linux open source projects. The author has been registered in Alberta
and BC as a P.Eng (Professional Engineer), but is currently enjoying retired life.
Who We Are and Where to Find Us
The Vital Statistics
||Lawrence P. Glaister VE7IT
|1462 Madrona Drive
|Nanoose Bay B.C.
|Canada V9P 9C9